Which type of battery is suitable for my bike?

The first criterion in choosing a battery is quality. Those with reduced price, usually last less and are heavier. We recommend choosing high quality batteries with Samsung or Panasonic lithium ion cells that guarantee reliability, more autonomy and performance

Other factors to keep in mind in the choice is also the capacity that is measured in Wh or in Ah. The conversion formula is:

Wh = Ah x Volt and vice versa Ah = Wh / Volt

For example a battery of 36Vx 21 Ah = 756Wh

The battery offers more autonomy in case the value of Wh is superior.

Our batteries are operated by an intelligent BMS that manages to regulate the charge and record parameters such as temperature, charge cycles, charging voltage and thanks to this the batteries are less damaged in their life.

Another factor to keep in mind is the shape of the battery. We offer you the following formats:

  1. Pouch Battery is recommended especially for city bikes and is inserted in the luggage rack with a key with the possibility of detaching it. We recommend it for its practicality, you can detach it even if there are bags on the bike.
  2. Pocket Battery we recommend for MTB and MTB FULL ideal for smaller frames, it is inserted in the frame triangle or under-saddle.
  3. Slim Battery in lugagge is recommended for all bicycles, has the most rigid shape, is inserted into the frame triangle.

 

To maintain and extend the life of your batteries we recommend:

  1. Charge your battery even if you travel a few kilometres
  2. Do not leave the charger connected to the network for a long time after its complete charge cycle
  3. Always load it in a ventilated place away from flammable materials
  4. Do not open the battery, this will invalidate the warranty
  5. Do not leave the battery exposed to sunlight or rain
  6. When not in use, charge it at least once every two months
  7. Do not leave the charger connected to the electric socket (220 V) when not in use

Please contact us if you have any doubts or questions, we will be at your disposal to provide you with more information.

 

Which motor is suitable for my bike?

The various types of motors that exist on the market can be distinguished by their position on the bike.

There are 2 categories of motors that can be assembled on bicycles:

  1. Central movement Motors
  • the motor is assembled on the central movement of the pedals
  • suitable for MTBs
  • act on the bike transmission system
  • they offer a more natural ride, suitable for longer and more difficult routes, with climbs
  1. On the front and rear wheel
  • assembled on the rear or front wheel
  • it is easy to assemble and are less expensive
  • suitable for urban use, for simple routes, not for too steep climbs.

We recommend our central movement motors of the brand BAFANG and TONGSHENG (TSDZ2),

The central engine BAFANG BBS01B HOMOLOGATED 250W 36W

  • equipped with the PAS sensor, with the simple turn of the pedals the engine is activated
  • is able to develop as many as 80Nm of torque
  • it is ideal for facing effortlessly slopes with up to 25%.
  • the pedalling is sporty and at the same time comfortable
  • complies with the Italian regulations for pedal assisted bicycles (characteristic 250W, 25 Km / h)
  • we also offer non-approved engines with power of 350W, 500W, 750W, 1000W

The TONGSHENG engine (TSDZ2)

  • uses the latest Torque technology, the motor follows the user’s pedalling
  • is approved by Italian legislation to 250W for use on public roads (350W and 500W engines are not approved)
  • with just one recharge, over 120 km are covered, with low energy consumption
  • there are 4 levels of assistance in pedalling ECO, TOUR, SPEED, TURBO-that can be changed easily, so you can tackle even the most difficult climbs
  • It is easy to install